best table saw under 500

If you are just a new guy in the wood crafting scenario looking for a versatile saw for every type of work, you might need a table saw. A table saw could be a true best friend of wood workers and artisans. But there are a lot of variations of table saws you can find in the retail market. Moreover, the budget is not always on our side, right? So, what are the best table saws under 500 USD?

If you are limiting your budget at $500, then you will get the portable or the semi-portable table saws. The industrial grades come at a higher price point.

So, we have prepared a perfect list of best table saws under 500 just for you.

We have given priority to portability, power-driving capability, being handy, DIY friendliness, and, of course, versatility.

So, let’s check out the top ten table saws, shall we?

The Review of Table Saws Under $500

Craftsman Evolv 10-Inch Table Saw

We would say Craftsman Evolv’s 10-inch table saw is the best one you can get within your budget.

Why?

Simply because of the power driving capability. The 15-amp electric motor can handle anything you throw at it! It will remain stable even while cutting wider wood pieces with 5,000 rpm. Craftsman Evolv 28461 will be your best friend.

This 50-pound weighing table saw could be your perfect partner for DIY projects. This one even comes with a stand.

So, you can move it around and place it where ever you please and start working.

We haven’t seen many table saws that can bevel. But this one can bevel its blade up to 45 degrees. The miter gauges and the fence make it a versatile saw capable of anything.

The table-top has a working dimension of 25 x 17 inches. So, you can use it in every kind of small jobs.

Some say that working with a table saw is risky as the blade remains naked and accidents could happen at any time. Well, not with Craftsman Evolv 28461! It comes with a blade guard too.

What more can you expect from a small DIY-friendly table saw?

Pros

  • 15A powerful motor
  • Comparatively less noisy
  • Comes with a 10-inch blade
  • Has a large blade guard
  • Beveling capability
  • Pivoting miter control and rack and pinion to adjust the height
  • Steel construction
  • Very light and easily portable

Cons

  • Smaller miter guides
  • Spare aftermarket miter guides will not fit
  • Doesn’t have a dust port

SKIL 3410-02 10-Inch Table Saw

SKIL is one of the more popular brands in the hardware scenario. Many woodworkers are a genuine fan of SKIL products.

It is almost as powerful as the Craftsman Evolv. SKIL 3410-02 has a 15-amp motor capable of producing 5000 rpm. Even comes with the 10-inch blade suitable for every kind of jobs. But it is slightly heavier than the Craftsman table saw.

There is something that makes this saw standing apart from the crowd – the extended beveling angle. The blade can bevel up to 47-degrees!

It can cut as deep as 3.5 inches which more than enough for common tasks. Also, the extended fence allows making 35-inch rip cuts.

The saw even comes with a stand like the previous one.

So, we think the SKIL 3410-02 is almost the same as the Craftsman Evolv variant.

Pros

  • Powerful 15-amp motor operating at 5000 rpm
  • 35-inch ripping and 3.5-inches of depth cutting capability
  • Makes easy straight cuts with self-aligning fence
  • Comes with size indicators
  • 47-degrees of beveling capability
  • Full metal construction

Cons

  • Doesn’t have a dust port
  • Heavier compared to other jobsite models

Rockwell BladeRunner X2 RK7323

Rockwell BladeRunner X2 RK7323

Rockwell is another big name in the hardware scene. This table saw from Rockwell is for those who are looking for the lightest, and the most portable table saw.

This mini power-house weighs just 14.7 pounds. You can just pick it up, place it somewhere suitable and set up in seconds.

But we have to remind you of something – this one is not a traditional table saw. Instead of having a circular saw, it comes with a T-Shank jigsaw.

Moreover, the blade is also smaller than the last two saws we mentioned. It comes with a 4-inch blade. But don’t let the size fool you – it can easily cut through wood even aluminum and steel.

As we have said, Rockwell BladeRunner X2 is a mini-powerhouse!

The saw even has seven different attachments. It is capable of making a rip, scroll, miter, and even pierce cuts.

The best thing is it even has dust collecting port that was missing from the earlier saws from out list.

In short, it could be a DIYers best friend, period!

Pros

  • Very lightweight and portable
  • Has steel rip fence
  • Comes with a hold-down guard causing less vibration
  • Quite powerful compared to the size, can deliver 3000 rpm
  • 0-60-degree mitering capability, both in left and right
  • It has seven different attachments

Cons

  • Cannot handle larger work-pieces
  • Has smaller top surface
  • Not as powerful as the traditional table saws

TruePower 01-0819 Mini Electric Table Saw

TruePower 01-0819 Mini Electric Table Saw

The best example of a small yet powerful mini table saw could be the TruePower 01-0819. It looks very sleek and compact. But don’t fall for the size. It can deliver over 9000 rpm with its 120v/60Hz motor.

If you are a perfectionist mad for precision and accuracy, this saw will make you smile. The wobble free blade will make every cut as perfect as it can get.

The dual handle design will ensure steadier control. This 5-pound table saw comes with a 4-inch circular blade.

Are you worried about safety? Just push the safety button and voila!

Pros

  • Extremely lightweight, only weighs 5 pounds
  • Wobble-free blade construction
  • Sleek yet powerful, 9000 rpm
  • Has a safety button
  • Perfect for hobbyists

Cons

  • Can make only straight cuts
  • No replacement blades available
  • Comparatively lower feed rate

Tacklife PTSG1A 10-Inch Table Saw

Tacklife PTSG1A 10-Inch Table Saw

Working with table saws can get very messy and dusty. You could find yourself covered by wood dust after a session at the workshop. Well, Tacklife PTSG1A offers a better scenario with the extra carbon brushes.

This table saw offers a wider working surface – the work table could extend up to 40 inches.

Tacklife PTSG1A is robust, heavy, powerful. The saw is meant for handling a heavier workload. You can rely on the 15-amp powerful motor as it can deliver 4800 rpm.

You should worry about versatility – the saw was designed for everyone!

You can make bevel cuts and miter cuts with the built-in miter gauge and even adjust cutting angle and depth.

Apart from the carbon brushes, it even has an integrated dust port.

If you are looking for a complete package – Tacklife PTSG1A is the solution you are looking for.

Pros

  • 15-amp motor operating at 4800 rpm
  • 10-inch blade suitable for every task
  • Sturdy steel construction with cast aluminum table
  • Extendable table reaching 40-inch width
  • Built-in dust port with carbon brush for cleaning
  • Up to 45-degree beveling capability
  • Overload protection system
  • Capability to handle hard, wet, and even frozen woods

Cons

  • Comparatively heavier
  • The motor can overheat and shut down unexpectedly with longer use

General International TS4004 10-Inch Benchtop Table Saw

General International TS4004 10-Inch Benchtop Table Saw

We were kind of shocked when we saw not many people being hyped about the General international’s TS4004. This a table saw that should make the carpenters, woodworkers, and DIYers sit in the same room.

This saw is great for every kind of users.

Comes with the standard 15-amp powerful motor. It is great for making rip cuts as it comes with rip fence and push-stick. You can easily make 30-inch rip cuts with this model.

Of course, the blade can bevel up to 45-degrees. At 90-degree angle, it can make 3.33-inch cuts and decreases at 2.5-inches when the blade is tilted at 45-degrees.

There is also a steel made wheeled stand that makes the saw to easily move around.

General International TS4004 comes with thermal overload protection. This is a major problem for a lot of table saws like in Tacklife PTSG1A.

The dust port will make your work less messy.

Pros

  • Has a powerful 15-amp motor
  • Thermal overload protection is included
  • Beveling capability up-to 45-degrees
  • Includes rip fence, miter gauge, push stick, and blade guard
  • Has a dust port
  • Comes with a safety switch

Cons

  • A bit overweight
  • Could cause vibration while working

Genesis GTS10SB 10-Inch Table Saw with Stand

Genesis GTS10SB 10-Inch Table Saw with Stand

For those of you who are looking for a solid table saw with maximum versatility, Genesis has the best saw for you – Genesis GTS10SB.

As you have got the point by now, 15-amp motor is the pretty standard motor when it comes to power delivery. The motor can deliver 4800 rpm.

One of the best things we loved about this one is the Rocker On/Off switch. If you turn on the Rocker switch, the saw will automatically turn off when the machine is facing an overload.

The rip fence will automatically adjust to the size of the workpiece. Say goodbye to the manual rip fences!

The die-cast aluminum table gives it a robust design that can handle heavier workpieces.

The sliding miter gauge can help you make seamless miter cuts at 45-degree.

Pros

  • The powerful 15-amp standard motor
  • Has the standard 10-inch blade
  • Can perform bevel, miter, cross, rip, and compound cuts.
  • The stable die-cast aluminum table gives stability against vibration
  • Has blade guard and anti-kickback pawls
  • Comes with a dust collection port

Cons

  • Users have complained about the blade control handle
  • There are even complaints about the saw design

DOIT TS-10 10-Inch Portable Table Saw

DOIT TS-10 10-Inch Portable Table Saw

We have heard a lot of complaints against the table saws to be less safe. The hardware company DOIT seeks to make their table saws as safe as possible.

That’s why they have designed this table saw with external overload protector that protects the motor. The motor resets when the load exceeds the boundary.

Moreover, it has wheels. So, you can move the saw with more comfort.

The table-top is made of high duty aluminum so that you get less vibration while working. The no-load rpm is 4800. We think we call it powerful enough to handle most of the common work.

The beveling angle is 0-45-degrees, and it can make miter cuts even greater than at 90-degree angle.

There is only one thing you could complain about – the depth of cutting. It can cut about 3-inches deep at 90-degree.

Pros

  • Has a standard 15-amp motor capable of operating at 4800 rpm
  • Stable table top made of heavy-duty aluminum
  • Has a 1.34-inches dust port
  • External overload protector
  • Comes with wheeled stands
  • Has rip fence, miter gauge, and push sticker storage

Cons

  • No DADO capability
  • Slightly overweight

WEN 3720 Jobsite Table Saw

WEN 3720 Jobsite Table Saw

WEN is one of the most famous names when it comes to hardware brands. We think this one is one of few reliable names in the market. They have a great history of making a quality product and often loved by the users.

It can cut up to 3.5 inches deep which is lovely! The 26 inches wide cutting table is quite enough for handling most types of workpieces. If it is still not enough you can buy an extended table extension.

Among all the stands, this model has the best one to offer.

Most of the people seem quite satisfied with the saw. Don’t believe us? Check out the online forums.

Pros

  • Has powerful 15-amp motor
  • Great for the depth cuts
  • Longer rip fence
  • 5-inch dust port
  • Great quality wheeled trolley
  • Compatible with DADO blades

Cons

  • The blade angle might deflect in rare cases
  • The trolley wheel is not suitable for every terrain surface

Bosch GTS103110-Inch Portable Jobsite Table Saw

Bosch GTS103110-Inch Portable Jobsite Table Saw

There is no doubt that you have heard the brand name Bosch if you are in the woodworking scenario. They are utterly famous for making great consumer quality hardware tools.

This one is another great table saw with the standard 15-amp motor capable of delivering 5000 rpm with no load. The standard 10-inch carbide tipped blade is suitable for every kind of jobs.

It can make 18-inch rip cuts with self-aligning rip fences.

You can store all the additional parts within the saw. So, it is truly portable. The best part is it weighs only 52 pounds.

Pros

  • Robust motor with 15-amp power delivery operating at 5000 rpm
  • Beveling and mitering capability
  • Self-aligning rip fence for rip and square cuts
  • Sturdy steel construction yet weighs 52 pounds
  • Expanded rip fence
  • One-handed carrying capability
  • Has smart guard for better safety

Cons

  • Changing blade is quite tricky
  • The blade is not wobble-free

Final Words

So, this was our detailed analysis of the best table saws available on the market. We would suggest you check a few things before you make a purchase – the motor specs, beveling and mitering capability, table-top size, and construction, rip length and rip fence, and dust collection capability.

How did you like our list of best table saws under 500 dollars? Let us know in the comment section.

Related Posts