If you are planning to set up your new wood workshop, you need to buy at least a few quality power tools, to begin with. Among all kinds of saws, we think, everyone would agree on the point that a table is the most important one a person can have. Basically, a table saw is the most versatile saw you can have, you can set it up on a stand or move it from job site to jobsite. So, what is the best table saw you can buy?
We have come up with a brilliant list of the best table saw regardless of the price. However, you should keep in mind that we have concluded this list with only the jobsite and benchtop type saws.
Yes, the stationary variations are far more powerful and robust compared to the jobsite or benchtop saws, but those are mainly for industrial or plank manufacturing business.
So, take a look at the top 10 best table saws you can get. If you don’t have much idea about how to choose a good table saw, you must check out the buying guide as it would help you a lot to choose the perfect one that can tend to your needs!
A Comparison Table Among the Best Table Saws
|Image||Name||Motor Amp Rating||No Load Speed (RPM)||Weight||Table Surface||Our Rating||Price|
|SKIL 3410-02||15 amp||5,000||67 pounds||20” x 26”||4/5||VIEW ON AMAZON|
|DeWalt DWE7491RS||15 amp||4,800||110 pounds||26.25” X 22”||5/5||VIEW ON AMAZON|
|Craftsman Evolv 28461||15 amp||5,000||50.4 pounds||25" x 17"||5/5||VIEW ON AMAZON|
|Bosch 4100-10||15 amp||3,650||60 pounds||29” x 32”||5/5||VIEW ON AMAZON|
|Rockwell BladeRunner X2 RK7323||5.5 amp||3,000||17 pounds||15.7” x 17”||4/5||VIEW ON AMAZON|
|SKILSAW SPT70WT-01||15 amp||5,300||49 pounds||24.7” x 26.4”||5/5||VIEW ON AMAZON|
|WEN 3720||15 amp||4,400||79 pounds||40” x 35”||3/5||VIEW ON AMAZON|
|Bosch GTS1031||15 amp||5,000||52 pounds||26” x 25”||4/5||VIEW ON AMAZON|
|WORX WX572L BladeRunner X2||5.5 amp||3,000||14.29 pounds||15.7” x 16.9”||3/5||VIEW ON AMAZON|
|Genesis GTS10SB||15 amp||4,800||56 pounds||24"x 20"||3/5||VIEW ON AMAZON|
The Top 10 Best Table Saws You Can Buy
The Best Table Saw Buying Guide: How to Choose the Perfect Table Saw?
If you are confused about which table saw to buy, we can help you out with some ideas, to be more precious, a buying guide. A table saw could be the most vital part of your workshop. You should never take your decision in a hurry.
There are a lot of factors you must consider before you come to a decision. Obviously, the price is a crucial factor, but there are others too.
For example, not everyone talks about the dado blades. With a dado blade, you can make flexible groove cuts of different width. A riving knife might make the operations safer. Furthermore, a dust collection port might help you to control the mess.
Just like these small things, your chosen table saw should contain features that can make your life easier.
Let’s check out such features that can be a true deciding factor.
The Right Type for the Right Job
There are different versions of the table saw, and each of them has special purposes and use cases. You should choose the one that can tend to your specific need.
Let’s start with the most common type of them all – the jobsite table saw. These table saws typically have a stand either with or without wheels. So, you can move this table saw from one place to another with ease.
The next type is called the benchtop model. A benchtop table saw is compact and smaller than other types. This can also make your jobs easier as you can pick up a benchtop table saw and move around places.
Then, there are different types of stationary table saws. These saws tend to be huge, bulky and immovable. You can find three typical variations in the market – contractor, cabinet, and hybrid.
The contractor saws are much more robust compared to the jobsite table saws. You can find them in large workshops and carpentry shops. Cabinets are the biggest and the most powerful type of all. These are generally used in industrial facilities.
Hybrid, as the name suggests, is a combination of the contractor and the cabinet type table saws.
Depending on your need and workspace size, you should choose the type.
Blade could be the most important part of the table saw. No matter how great the motor and design are if the blade is bad, the whole saw is bad!
Factors like blade diameter, arbor size, kerf size, teeth count, tip material, etc. make a huge difference while working.
You can find mostly a 10” or a 12” blade dimension among the common table saws in the market. Some small table saws have 4” or a 5” diameter. Apart from these common sizes, you can find some odd dimensions too. However, you might have to look really hard for them.
The commonly found teeth count varies from 24 to 80. Smaller teeth count ensures faster operation but cut quality is rather rugged. You can get much finer cut from high teeth count blade.
Those of you who have to work with mostly hardwoods make sure to buy a blade with hardened tip. A carbide or carbon tipped blade will offer you a smoother cutting experience. There are diamond-tipped blades on the market too, but they are quite expensive.
Miter gauge and Rip Fence
These are two of the most crucial parts of a table saw that are often overlooked. The modern table saws are now so versatile because of having the miter gauge. With it, you can make crosscuts and angled cuts which were impossible with the older designs.
So, you might not need a separate miter saw is you have a good table saw!
A rip fence helps an operator to have better accuracy while working. In fact, without it making long or rip cuts would have been nearly impossible with a table saw.
Basically, you will get more versatility with these two essential parts. Make sure that you have chosen a saw with perfect miter gauge and rip fence as a lot of lower grade table saws have flimsy rip fences.
Motor and Power
There is no doubt that with a more powerful motor, you can cut off wood or other working material like butter. An average sized jobsite table saw should come with a 15-amp motor. However, for the stationary saws, you will need much more.
A stationary saw should have a motor that can deliver 3HP to 5HP. On the other hand, you shouldn’t expect the small bench top blade runners to have such a powerful motor. A 5-amp motor is quite sufficient.
No matter what, your table saw should have a no-load speed above 3,000 RPM. Otherwise, you will not feel the true power. With higher RPM count you can feel less vibration and the cuts will be finer and smoother.
Just think of a table saw for a moment, it’s is a naked motorized saw with a sharp blade on top of it – there is no doubt that accidents might happen any time. Within seconds you might be a victim of a nasty life-changing accident.
A good table saw must have some smart anti-accident features. You should look for at least these three safety features – riving knife, splitters, and anti-kickback mechanism. A good blade guard is also a must.
Always, use safety tools like protective gloves, glasses, and helmet while working. Remember, it’s always better to be safe than sorry.
To increase functionality, there is no other way than having some useful accessories. The most important accessory for a table saw would be a good extendable table top extension as it drastically increases the working space.
Then, there is the on/off switch that is a great safety equipment. A dust collection port is a must if your workshop is adjacent to your house. It would make your workshop times much less messy.
Other than these more common accessories, there are the dado blades, different kinds of jigs, molding heads, and crosscut sleds. These accessories would help you to bring in the “A-game” while working.
So, that was our take on the best table saw. We hope that we have helped you a bit about finding a good one for you. We just want to give you a fair tip – if you have the budget, choose a heavy and sturdy one coming from a good brand with a reputation.
These brands have earned their names with quality and durability. Always make sure, your table has adequate safety mechanisms. Table saw accidents can be dangerous and you don’t want to fall victim of it.
Best of luck with your purchase and work safe!